NVOFFROAD BLOG

Welcome to the NV-offroad.com Blog, where we will be doing ground-up builds, discuss tips and tricks, and much more. We welcome discussion about parts, builds, trends, new products and everything in between. Please reach out if you have something you would like to see discussed. 

Default blog

White Jeep is For sale!

White Jeep is For sale!

White Jeep Build is for sale.

Tube Doors

Tube Doors

White Jeep gets tube doors.
Testing Gluetread

Testing Gluetread

GlueTread 4X4 sidewall repair kit.

Warm up on the Trail

Warm up on the Trail

One of the higher points on the dry lakes loop in Spanish springs.
hydraulic scissor lift

hydraulic scissor lift

Hydraulic scissor lift for cycling suspension and generate RTI numbers.

White jeep get’s bed liner, seat’s and belts installed.

White jeep get’s bed liner, seat’s and belts installed.

This episode we prep and spray primer and bed liner.

White Jeep trail ride

White Jeep trail ride

It is getting close to time to see how White Jeep does out on the trail. lets start talking some local short trips.

Roll Bar and belt bar fabrication part 2

Roll Bar and belt bar fabrication part 2

Last part of roll bar and seatbelt bar. We measure, draft, cut bend and weld in the belt bar.

Mounting a SmittyBilt XRC GEN3 12K Winch

Mounting a SmittyBilt XRC GEN3 12K Winch

installation of a SmittyBilt XRC 12k winch
Roll Bar and belt bar fabrication

Roll Bar and belt bar fabrication

Installing a belt/roll bar. But I make a big mistake!
Finishing up the Uni-rail work

Finishing up the Uni-rail work

We welded up the mounts front and back with all the hard ware and the unirail stiffeners and mounts all welded together should be plenty strong.
XJ Center Console

XJ Center Console

Hello Everyone, the Xj center console certainly isn’t my favorite, neither of my two Jeeps have a cup holder! Wile that is an outrage there’s a lot more the center console could be doing for us.
Installing 4-link mounts

Installing 4-link mounts

Now that we have the stiffing plates completed we can install the mounts for the Four links. The kit is made by Rusty offroad products. This is their “competition” Kit and it does appear to be plenty strong. The..
Fitting Uni-Rail stiffeners

Fitting Uni-Rail stiffeners

Now that all the areas we will be welding are cleaned up and stripped down to the bare metal. Wait, you don’t remember getting down to…
Custom Parts

Custom Parts

Do you find yourself in a situation that requires a custom bracket, hanger, or maybe armor?
White Jeep gets ready for Frame stiffeners

White Jeep gets ready for Frame stiffeners

The next step with White Jeep is going to be much easier with some room to work. Seeing’s to how the rear differential is in bad shape we will use the stock Dana 35 that came out of the Gray Jeep when it was upgraded to the Dana 44.